FS Plus

FS Plus

PRICE (excluding VAT) QTY
Each £19.95 QTY 4+£18.50
Quantity: 

Safety Information

Contains Sulphamic Acid & Orthophosphoric Acid. Size: 5L

Solvent for lime scale, calcium deposits and urinary calculus.

For cleaning hard surfaces and tiled areas in swimming pools, steam rooms and shower areas; ideal for cleaning handrails and for removing scale from shower-heads.

Effective cleaning power – maintains clean, well-presented surfaces.

Dissolves urinary calculus, mineral and lime deposits. Removes body fats and algal slime from most surfaces. Degreases and removes rust. Prevents growth of bacteria, fungi, moulds and mildew. Concentrated – cost effective in use. Safe to use on glass panels and on most rubber, metals, steel, concrete or sealing compounds. Does not affect the pH of water in swimming pools or spas. Also suitable for use in wastewater treatment plants, waterworks, hospitals, hotels and restaurants, shower stalls, slaughterhouses, dairies and breweries

APPLICATION

FS-Plus does not give a lather or foam in use. Daily or weekly cleaning is recommended to prevent the build up of stains, as these will become more difficult to remove the longer they are left on the surface. Can be used neat or diluted with water. Dilution with water can be varied between 1:1 and 1:10, depending on the application. FS-Plus can be applied with a brush, in a stream or by immersion or simple soaking.

SWIMMING POOLS

Poolside tiles - Mop or jet FS Plus onto all surfaces, agitate with a brush, then leave for 3 to 5 minutes (dependent on severity of soiling). Rinse thoroughly to drain.

STAINLESS STEEL

For rails and ladders, apply FS Plus with a sponge or scourer to area; rub to remove soiling and rinse away.

POOLSIDE GLASS

Spray a mild solution of FS Plus onto stained area, then rinse or squeegee.

STEAM ROOMS

Mop or jet FS Plus onto all surfaces, agitate with a brush, then leave for 3 to 5 minutes (dependent on severity of soiling). Rinse thoroughly to drain.

SAUNA FLOORS

Mop or jet FS Plus onto floor tiles, agitate with a brush, then leave for 3 to 5 minutes (dependent on severity of soiling). Rinse thoroughly to drain.

CHANGING ROOMS

Walls and floor tiles Mop or jet FS Plus onto all surfaces, agitate with a brush, then leave for 3 to 5 minutes (dependent on severity of soiling). Rinse thoroughly to drain.

SHOWERS

SHOWER HEADS

Soak in a solution of FS Plus overnight, then rinse and replace.

TILED AREAS IN SHOWER STALLS, SPAS AND STEAM ROOMS

Apply FS Plus, then agitate with a brush; leave for 3 to 5 minutes, then rinse thoroughly to drain.