|R36/37/38 Irritating to eyes, respiratory system and skin.|
|S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.|
|S28- After contact with skin, wash immediately with plenty of soap and water.|
|S37 Wear suitable gloves.|
|S39 Wear eye/face protection.|
Aluminium Sulphate. Size: 750g, approx 15 tablets
Coagulates fine particles which make pool water cloudy. Filtration aid. Slow release onto filter bed. Easy dosing; place directly in skimmer basket(s).
Add 1 x EasyChemicals Flocculant Tablet for each 50 cubic metres of pool water. Unwrap the tablet(s) and place directly in the skimmer basket(s).
APPLICATION Check the pH of the pool water and adjust this to an ideal pH of 7.5 or between pH 7.2 and 7.6 (7.8 in a bromine-treated pool or spa) by use of the recommended pH adjustment chemicals. Then backwash the filter to clean. When the tablet has dissolved, run the circulation pump for at least 48 hours, then backwash again. The EasyChemicals Flocculant Tablets will gather suspended particles which may settle onto the pool floor. Vacuum the floc and gathered debris to waste. Dose again as necessary. Check and re-adjust the pH to around 7.5 and Free Chlorine to not less than 2.0 ppm.
NOTE: FOR USE WITH SAND FILTER SYSTEMS ONLY. NOT TO BE USED WITH CARTRIDGE OR DIATOMACEOUS EARTH FILTERS.