Mould Release Oil B 1000L IBC


(QTY 4+)


Quantity discounts available

£1,495.00 each

Mould Release Oil B 1000L IBC   Mould Release Oil B is a water soluble, oil based, concrete mould release agent (C & CA designation CS category 4). It is designed to be an effective, economical mould release agent, supplied in concentrate form to be diluted to 10% with water for use.   Applications - It is suitable for use on non-porous mould materials in the production of relatively simple components such as flagstones, kerbstones, fence posts, etc. where a good stain free surface is required. The emulsion should be prepared by adding the concentrate to water (rather than water to the concentrate) with continuous stirring, this will produce a stable milky emulsion. The prepared emulsion may be applied to the mould/ formwork by brush, swab or spray. Mould Release Oil B must not be applied neat.   Typical Test Data Density @ 15oC (Neat) 0.9 Estimated Coverage 6.8 m2 /L pH (10% emulsion) 9.3   Storage - Barrels of lubricant should always be stored in such a way that will prevent the ingress of water when stored in the open. Protect from frost.