Safety Information
Alkaline Soda Ash (Sodium Carbonate).
For use where an increase in pH is required. Reduces likelihood of pH bounce and grout loss.
DOSE INFORMATION
Add 1kg EasyChemicals pH Increaser per 100 cubic metres of pool water (15 ounces per 10,000 gallons). When used in soft water pools the dose rate should be halved to avoid wide swings of pH.
APPLICATION Ideally the pH of pool water should be maintained around 7.5 and between 7.2 and 7.6 at all times (7.8 in a bromine-treated pool or spa). If the pH falls to 7.2 or below add EasyChemicals pH Increaser into 10 litres of fresh water, using a clean plastic container and mix carefully. Slowly pour the solution into the pool water, close to the return inlets and rinse out container thoroughly after use. After 24 hours re-check the pH and repeat the treatment dose as necessary.